Arleigh Burke Guided-Missile Destroyer Program Marks Key Milestones

May 21, 2018 3:27 PM
Artists rendering of the first planned Flight III Arleigh Burke destroyer, Jack H. Lucas. HII Photo
Artists rendering of the first planned Flight III Arleigh Burke destroyer, Jack H. Lucas. HII Photo

May marked a pair of milestones in the Arleigh Burke-class guided-missile destroyer program, including the start of fabrication of the first Flight III ship, according to Naval Sea Systems Command.

Steel was cut on the future Jack Lucas (DDG-125) at Huntington Ingalls Industries earlier this month, just after the Navy and the shipbuilders completed the final functional design of the Flight III ship.

The ship is named after Marine Jack Lucas, who earned a Medal of Honor for actions in the World War II Battle of Iwo Jima.

The Flight III hull is designed around the under-development AN/SPY-6(V) Air and Missile Defense Radar (AMDR) that will replace the AN/SPY-1D(V). The Raytheon-built SPY-6 promises a radar that would be up to 30 times more sensitive than the legacy SPY-1 radars but also demands more power. The additional requirements to accommodate the SPY-6 prompted a redesign of the DDG’s hull.

Harvey Barnum, Jr. in 2007 and then-PFC Jack Lucas, USMC

HII was awarded the contract for the first Flight III after more than a year of negotiations between General Dynamics Bath Iron Works and HII last year.

Despite the length of the negotiations, the fabrication date lined up with the planned schedule for construction outlined in December by NAVSEA.

At Bath, the yard began construction on the future Harvey C. Barnum Jr. (DDG-124). Barnum will be among the last Flight IIA configurations of the Burke.

The ship is named for retired Marine Col. Harvey C. Barnum Jr., who as a first lieutenant was awarded the Medal of Honor for actions in 1965 during the Vietnam War.

“This is an exciting time in the DDG-51 program as we celebrate the start of construction on DDG 124 and DDG 125,” Capt. Casey Moton, the DDG-51 class program manager, said in a NAVSEA statement.
“Both of these ships are named after Medal of Honor recipients and we are proud to honor their legacy with such capable warfighters.”

The following is the complete statement from Naval Sea Systems Command:

DDG 51 Program Marks Start of Construction Milestones at BIW and HII
From Team Ships Public Affairs

WASHINGTON – The Navy’s Arleigh Burke-class (DDG 51) destroyers continue to achieve shipbuilding milestones with start of construction at both shipbuilders, Bath Iron Works (BIW), Bath, Maine, and Huntington Ingalls Industries, Pascagoula, Mississippi.

On May 17, construction of the future USS Harvey C. Barnum Jr. (DDG 124) began at BIW. The ship’s namesake, Col. Harvey “Barney” Barnum, Jr. (ret.), was on hand to officially mark start of fabrication on the ship.

In Pascagoula, Mississippi, construction of the future USS Jack H. Lucas (DDG 125) officially began on May 7. DDG 125 will be the first Arleigh Burke class destroyer built in the Flight III configuration with improved capability and capacity to perform Anti-Air Warfare (AAW) and Ballistic Missile Defense (BMD) in support of the Integrated Air and Missile Defense (IAMD) mission.

These milestones, which signify the first 100 tons of steel being cut, were marked with ceremonies held in the shipyards’ respective fabrication shops.

“This is an exciting time in the DDG 51 program as we celebrate the start of construction on DDG 124 and DDG 125,” said Capt. Casey Moton, DDG 51 class program manager, Program Executive Office (PEO) Ships. “Both of these ships are named after Medal of Honor recipients and we are proud to honor their legacy with such capable warfighters.”

These ships are Aegis baseline 9 (DDG 124) and baseline 10 (DDG 125) IAMD destroyers with significant capabilities against modern air warfare and BMD) threats. When operational, these multi-mission surface combatants will serve as integral players in global maritime security, engaging in air, undersea, surface, strike and ballistic missile defense as well as providing increased capabilities in anti-submarine warfare, command and control, and anti-surface warfare.

As one of the Defense Department’s largest acquisition organizations, PEO Ships is responsible for executing the development and procurement of all destroyers, amphibious ships, special mission and support ships, and special warfare craft.

Sam LaGrone

Sam LaGrone

Sam LaGrone is the editor of USNI News. He has covered legislation, acquisition and operations for the Sea Services since 2009 and spent time underway with the U.S. Navy, U.S. Marine Corps and the Canadian Navy.
Follow @samlagrone

Get USNI News updates delivered to your inbox