Stricken Destroyer USS Fitzgerald Arrives in Mississippi for Two Years of Repairs

January 19, 2018 5:32 PM - Updated: January 21, 2018 6:03 PM
The guided-missile destroyer USS Fitzgerald (DDG-62) arrives at the port of Pascagoula, Miss. on Jan. 19, 2018 aboard the heavy lift transport vessel M/V Transshelf. US Navy Photo

The guided-missile destroyer USS Fitzgerald (DDG-62) has arrived in Mississippi ahead of repairs that were the result of a fatal collision with a merchant ship in June, the Navy announced on Friday.

The destroyer departed Yokosuka, Japan in late November lashed to the deck of the heavy-lift transport M/V Transshelf. The transport transited the Pacific and arrived at the U.S. Gulf Coast via the Panama Canal, according to Naval Sea Systems Command.

Fitzgerald is expected to spend several days in the Port of Pascagoula as the heavy lift ship will commence the reverse operation of unfastening, lowering and guiding the ship off the platform. The ship will then be taken to its designated pier space at Huntington Ingalls Industries shipyard,” read a statement from NAVSEA.
“Work on the ship is expected to occur on a land level facility throughout 2018 and one to two quarters of 2019, followed by an extensive test and trials period to ensure all systems and spaces are restored to full functionality and operational capability.”

The process to restore Fitzgerald is expected to take two years.
The collision with the merchant ship ACX Crystal resulted in extensive damage to the ship below the water line and the superstructure. In total, the final cost for the repair for Fitzgerald is estimated to run about $367 million, according to a Navy cost estimate obtained by USNI News.
Seven sailors died in the collision.
The following is the complete statement on the arrival of Fitzgerald to Mississippi.

WASHINGTON (NNS) — The Arleigh Burke-class guided missile destroyer USS Fitzgerald (DDG 62) arrived in Pascagoula, Mississippi, Jan. 19, aboard heavy lift vessel MV Transshelf inward bound from Yokosuka, Japan.

Fitzgerald is expected to spend several days in the Port of Pascagoula as the heavy lift ship will commence the reverse operation of unfastening, lowering and guiding the ship off the platform. The ship will then be taken to its designated pier space at Huntington Ingalls Industries shipyard.

Due to the extent and complexity of the restoration, both repair and new construction procedures will be used to accomplish the restoration and modernization efforts. Various Hull Mechanical and Electrical (HM&E); Command, Control, Communications, Computers and Intelligence; and Combat System equipment, including the electronic warfare suite, radar, switchboard, gas turbine generator and air condition plant, require repair and/or replacement. Fitzgerald will also receive HM&E; Combat System; and Command, Control, Communications, Computers, Collaboration and Intelligence; upgrades that were originally planned for installation during a fiscal year 2019 availability.

Work on the ship is expected to occur on a land level facility throughout 2018 and one to two quarters of 2019, followed by an extensive test and trials period to ensure all systems and spaces are restored to full functionality and operational capability. The entire restoration and modernization effort is expected to complete approximately 24-months post work commencement on the ship.

Fitzgerald was involved in a collision with the Philippine-flagged ACX Crystal June 17. Seven Sailors lost their lives and the ship was damaged on the starboard side above and below the waterline. The Navy released a comprehensive review of the incident Nov. 1.

Sam LaGrone

Sam LaGrone

Sam LaGrone is the editor of USNI News. He has covered legislation, acquisition and operations for the Sea Services since 2009 and spent time underway with the U.S. Navy, U.S. Marine Corps and the Canadian Navy.
Follow @samlagrone

Get USNI News updates delivered to your inbox